How To Change The Wifi Name And Password Att

If you apply AT&T for your Internet service, you probably have an AT&T router/modem as your hardware connection betoken for the service. This router connects to all the devices in your home that you want to hook upwardly to the Internet, including your computers, laptops, tablets, smartphones, smart TVs, and other connected devices.

While the AT&T installation technician presumably left your equipment all setup and configured properly, complete with a default password, you may want to change that countersign to ane of your own choosing or brand other security-related changes. Irresolute your AT&T password to something more secure can protect your home network from unwanted guests.

In this article, I will show yous how to brand these changes to your AT&T equipment and increase the security of your wireless network. I'll likewise show you how to adjust another important settings on your AT&T router.

Your Hardware

AT&T Internet services have used a wide diverseness of equipment combinations for the router/modem hardware used for their service over the years.

Typically, Net providers settle on a solid, reliably high-performing hardware combination and sell it for a while, until a better slice of equipment or a better price comes along and and then they switch to that one.

The downside of this is that not every router has the aforementioned interface, so full general instructions tin be hard to provide. The upside is that the hardware variety means that the Net provider (in this case AT&T) has to keep things elementary and so that all of their supported hardware works on the service.

You should make a annotation of the hardware that you were provided with when you signed up for AT&T Cyberspace service. It's an fantabulous idea to take a photograph of the bo, along with the sticker that almost all routers at present have which shows their default network names, passwords, etc.

This tin save you lot a lot of headaches afterwards when you lot are trying to configure the router remotely and can't remember the TCP/IP address or the admin password.

With that out of the way, permit'due south take a look at how you can alter your AT&T WiFi password.

Smart Home Manager

One actually dainty feature of AT&T's Cyberspace service is that they provide a spider web-based interface for decision-making your router along with an Android app and an iPhone app that do the same thing.

This service, chosen the Smart Dwelling house Manager, allows you to view and manage all your device connections, view all the devices connected to your network, and toggle WiFi access to each individual machine on your network — making it easy to keep your network secure.

You tin can also utilize Smart Home Managing director to change your WiFi password and even change the network proper name. Just log into the service with your AT&T username and password and follow the screens to achieve your needed tasks.

Still, non all routers and non all subscribers support the Smart Home Manager, and then if y'all cannot utilise this useful tool, you'll have to alter your password manually using the instructions below.

Am I Going to Break Something?

Lots of people worry that they're going to damage their Net service somehow if they mess around with their router settings. Not anybody is a tech skillful.

The truth is that if yous actually ready your mind to it, you could intermission some things by getting into your router'southward configuration page and changing things that you don't understand.

The simplest remedy for this problem? Don't change annihilation you lot don't sympathise!

Fortunately, unproblematic items similar changing the WiFi password are pretty safe to exercise. You also have the ability to reset the router using the button on the back. This will reboot the whole unit and usually undo anything yous may have messed up inadvertently.

If you're worried near breaking something or messing something upward, every bit long as you lot follow instructions, you should exist completely fine.

How to Change Your AT&T WiFi Password

Irresolute the default WiFi password on the modem is usually the first thing you want to do once your service is connected. This isn't just an AT&T affair — you should modify your password whenever you get a new Internet service provider.

To practice so, just follow these steps:

1. Look at the sticker on the side of the modem for the IP address for configuration and Device Access Lawmaking. The IP address might be http://192.168.one.254 or it might be something else.
2. Connect your computer to the network if it isn't already.
3. Enter the IP address into your browser and enter the Device Admission Lawmaking when prompted.
4. Select LAN and WiFi.
5. Select User Network and alter the WiFi password where indicated.
6. Select Save at the bottom right of the page.

Y'all will at present be able to use your new WiFi password to admission the network. If your computer is connected via WiFi, you may exist kicked off the network and have to log in again.

Change the SSID on the 2Wire Gateway

The SSID (service prepare identifier) is the name of your network. The default SSID on an AT&T 2Wire Gateway, one of the most mutual modem/routers, is typically '2WIRE' plus the concluding 3 digits of the modem'southward serial number.

Everyone knows this and, while each modem has a dissimilar serial number, it doesn't take a genius to try dissimilar number combinations to admission it. If you lot live in a busy flat complex or somewhere with lots of AT&T customers, this doesn't assist network identification either.

In add-on, naming your network is an opportunity to be artistic. Sure, you lot could go with "Sue'due south Network" but wouldn't "The Domain of Doom" look cooler? And either one is meliorate than "2WIRE361."

So let's change the SSID. Just follow these v steps:

1. Log into your 2Wire Gateway modem using http://192.168.one.254 in a browser.
2. Select LAN and WiFi.
3. Select Network Name (SSID).
4. Change the default name to something else.
5. Select Save at the bottom right of the folio.

Irresolute the SSID is a simple stride that makes a pocket-sized positive affect on security. Still, information technology is more useful for network identification when there are lots of WiFi networks. When coming up with a name, attempt to make it memorable without giving abroad private information. And then, rather than 'JohnSmithsNetwork' or 'Apartment26WiFi,' make information technology something that doesn't identify you by name or address. This is some other minor security precaution but 1 that is worth doing while you lot're configuring your modem.

Enable WPA2 Security on the 2Wire Gateway

Ane additional tweak for your AT&T 2Wire Gateway is to ensure information technology is using the latest encryption. Newer installations have WPA2 encryption enabled past default which is a plus point for AT&T. Older modems may still exist using WPA which is much weaker. If yous want to fully secure your WiFi network you volition desire to ensure you are using WPA2.

Follow these steps to enable WPA2 security on your 2Wire Gateway:

1. Log into your 2Wire Gateway modem using http://192.168.ane.254 in a browser.
2. Select LAN and WiFi.
3. Roll User Network and find Authentication Blazon.
4. Confirm it is WPA2 or alter it if it isn't.

AT&T uses WPA2-PSK (AES) which is the electric current standard for security. It should keep your wireless network rubber until WPA3 comes along. If y'all modify the encryption blazon, y'all do not need to change your password again or perform whatever other changes. Your devices will automatically detect and configure themselves for the alter.

Modify the Frequency Ring

Newer Internet installations will generally have a modem/router which supports two dissimilar signal frequencies — two.4 GHz and 5 GHz. In that location are a few of import differences between the bands.

2.4 GHz signals penetrate solid objects like walls and floors amend than five GHz signals and have a somewhat longer range every bit a event. However, 5 GHz connections provide higher throughput.

Either band is generally going to give you a fast, reliable signal. The 2.4 GHz band is used by things like baby monitors and garage door openers. In addition, the ii.four GHz band has just iii consumer channels while the 5 GHz band is used only for networking and has 23 channels.

In general, if you lot can get a good 5 GHz signal for your connected device, that's the ring to use. Most new routers back up (and broadcast/receive) simultaneously on both bands, in consequence running two different networks. Ane will unremarkably take the words "five GHz" or something similar appended to the SSID, then you might see "2WIRE291" and "2WIRE291 5 GHz" when you search for connections. Information technology'southward commonly a question of picking the right network for your device when you connect information technology to the network.

However, yous may have to choose which band your router works on. In that case, follow these instructions to set the frequency on your router. As of this writing (April 2019), AT&T has three unlike router models that allow a manual ring selection.

Technicolor TC7200

1. Enter 192.168.0.1 in your browser.
2. Log in using your data or useadmin every bit the user proper noun and password.
3. Select Wireless, and so selectRadio in the 5 GHz section.
4. In the pinnacle selection field, you lot tin can at present actuate 5 GHz.
5. ClickSave.

Thomson TWG870

1. Enter 192.168.0.1 in your browser.
2. Exit the user field empty and useadminas the password.
3. SelectWirelessfrom the menu.
4. In the 802.eleven ring selection field, you lot can select 2.4 GHz or 5 GHz.
5. ClickUse.

Ubee EVW3226

1. Enter 192.168.0.one in your browser.
2. Log in using your data or useadmin every bit the user name and password.
3. SelectWireless from the card.
4. Select Radioon the left-hand side in the 5 GHz section.
5. In the peak pick field, y'all can at present activate five GHz.
6. ClickRelieve.

Read More

To improve your home network security, it's non a bad idea to change your AT&T password after having your Internet installed.

Fortunately, changing your AT&T WiFi password is fairly straightforward. Simply follow the steps outlined above to apace and easily change your network password.

Practice you have any other suggestions for administering your AT&T wireless network? Share them with u.s.a. in the comments beneath!

We have a lot of other bang-up tutorial material to help yous become the most out of your WiFi!

Having trouble getting disconnected from WiFi? Bank check out our tutorial on fixing disconnection problems.

Wonder which channel to utilize? See our article on the all-time channels to apply with 5 GHz broadcasting.

Concerned that you've got a leech? We'll show you how to tell whether someone is using your WiFi…and once you've institute them, how to boot them off.

Got a Kindle Fire? Here'due south how to connect your Fire to your network.

Source: https://www.alphr.com/change-att-wifi-password/

Posted by: pageothessonce.blogspot.com

Share this post